天荣矿二2煤储层物性及特征

煤储层物性及特征是煤层气地质理论的重要内容，加强其研究对提高煤层气勘探开发成效至关重要。基于天荣矿地质、煤层气勘探及相关测试等资料，采用地质与煤层气地质理论对该矿二₂煤储层物性及特征进行了研究。结果表明:天荣矿二₂煤层物理性质良好，生烃物质丰富；煤层含煤性、稳定性、可采性好，煤层气含量和纯度高，可为煤层气开发提供良好对象和气源条件；煤变质程度高，煤中裂隙相对发育，但其渗透性整体较差，渗透率分异显著且普遍低下；煤储层能量较强且分异显著，煤储层压力状态为欠压—超压型，并以正常—超压煤储层压力状态为主，有利于煤层气高产富集。     

[工程应用]智能制造场景的5G应用展望

为满足智能制造领域物联网当前发展的需求，研究了相应制造场景的5G应用技术。介绍了5G的关键技术，包括5G支持的应用场景、网络切片、网络功能虚拟化（NFV）/软件定义网络（SDN）、多接入边缘计算、设备对设备通信技术等；给出了基于扩展的信息物理系统5层框架，基于该框架分析了多个智能制造场景的5G应用（包括人机界面和生产信息技术、流程自动化、工厂自动化、物流和仓储、设备监控和维护等）；给出了以上应用的5G边缘计算开发框架，以集成上述场景；探讨了5G应用于智能制造场景所面临的多个挑战，以助于5G使能智能制造的落地应用。     

改良剂对重金属污染根际土壤理化性质影响的研究进展

针对现阶段土壤中重金属污染较为严重的问题及各类修复方法各有利弊的现状,分析了近年来相关学者对于改良剂对重金属污染根际土壤理化性质影响的研究进展,研究了常见有机和无机改良剂对重金属胁迫下根际土壤pH值、氧化还原电位(Eh)、酶活性、化学性质、微生物菌落种群等理化性质的影响以及对重金属的化学沉淀和溶解平衡的影响。后期应加强超富集植物与一般植物根际、非根际理化性质的差异研究;土壤中重金属种类及污染程度与根际土壤理化性质的关系研究;土壤中其他环境因子的影响以及根际土壤中重金属的作用机理方面的研究。     

Influence of the porous transport layer properties on the mass and charge transfer in a segmented PEM electrolyzer

A titanium Porous Transport Layer (PTL) is usually used at the anode side of PEM water electrolyzers to ensure both the gas/water transport and the electric charges transfer. In this paper, four different sintered Ti powder PTLs were characterized to determine some properties, such as the pore size distribution, the porosity, and the permeability. Their influence on the electrolysis performance was investigated by using a 30 cm² segmented cell which allowed measuring the current density distribution, while controlling temperature and pressure conditions. For a better understanding, in-situ techniques such as the Polarization Curves and the Electrochemical Impedance Spectroscopy (EIS) were used. A local characterization of mass transport limitations caused by oxygen saturation was carried out, paying special attention to the pressure influence when using a PTL with very small pores. The results showed that current density heterogeneities can be explained by microstructure changes along the PTL. The optimal geometric characteristics of the PTL depend not only on the operating conditions such as current density, pressure, and temperature but also on the catalyst layer properties. A new model for the constriction resistance between the catalyst layer and the PTL was proposed.     

基于涡动相关法的沉积物-水界面氧通量与水动力条件响应关系

沉积物-水界面是物质参与环境地球化学循环和生物耦合的"热区",水动力条件是沉积物-水界面物质交换的关键影响因素。溶解氧作为常用的水质评价指标,对调节生物化学进程有重要作用,因此本文采用涡动相关法这种非侵入式通量测量技术开展室内试验研究,探究沉积物-水界面氧通量与水动力条件的响应关系。结果表明:随着水体紊动增加(采用Batchelor尺度表征),扩散边界层厚度减小,氧通量增大。分析室内试验和相关研究中水动力条件、扩散边界层厚度及氧通量的关系,发现扩散边界层厚度与Batchelor尺度呈正相关关系,拟合结果表明可以用Batchelor尺度近似表示扩散边界层厚度;氧通量与扩散边界层厚度呈负相关关系,且当扩散边界层厚度小于0.5 mm时,扩散边界层厚度变化对氧通量影响更强烈,当厚度大于0.5 mm后,氧通量基本保持稳定。     

Sarcopenia: Molecular Pathways and Potential Targets for Intervention

Aging is associated with sarcopenia. The loss of strength results in decreased muscle mass and motor function. This process accelerates the progressive muscle deterioration observed in older adults, favoring the presence of debilitating pathologies. In addition, sarcopenia leads to a decrease in quality of life, significantly affecting self-sufficiency. Altogether, these results in an increase in economic resources from the National Health Systems devoted to mitigating this problem in the elderly, particularly in developed countries. Different etiological determinants are involved in the progression of the disease, including: neurological factors, endocrine alterations, as well as nutritional and lifestyle changes related to the adoption of more sedentary habits. Molecular and cellular mechanisms have not been clearly characterized, resulting in the absence of an effective treatment for sarcopenia. Nevertheless, physical activity seems to be the sole strategy to delay sarcopenia and its symptoms. The present review intends to bring together the data explaining how physical activity modulates at a molecular and cellular level all factors that predispose or favor the progression of this deteriorating pathology.     

A multilevel sampled‐data approach for resilient navigation and control of autonomous systems

Autonomous systems are rapidly becoming an integrated part of the modern life. Safe and secure navigation and control of these systems present significant challenges in the presence of uncertainties, physical failures, and cyber attacks. In this paper, we formulate a navigation and control problem for autonomous systems using a multilevel control structure, in which the high‐level reference commands are limited by a saturation function, whereas the low‐level controller tracks the reference by compensating for disturbances and uncertainties. For this purpose, we consider a class of nested, uncertain, multiple‐input–multiple‐output systems subject to reference command saturation, possibly with nonminimum phase zeros. A multirate output‐feedback adaptive controller is developed as the low‐level controller. The sampled‐data (SD) design of this controller facilitates the direct implementation on digital computers, where the input/output signals are available at discrete time instances with different sampling rates. In addition, stealthy zero‐dynamics attacks become detectable by considering a multirate SD formulation. Robust stability and performance of the overall closed‐loop system with command saturation and multirate adaptive control are analyzed. Simulation scenarios for navigation and control of a fixed‐wing drone under failures/attacks are provided to validate the theoretical findings.     

An efficient method of generating vortex electromagnetic wave based on double‐layer transmissive metasurface

A broadband double‐layer transmissive metasurface (TMS) for effective generate vortex electromagnetic wave is presented in this paper. The proposed TMS consists of two types of elements. The first element is composed of a multi‐resonant dipole and four metal vias. The metal vias increase the coupling strength between the upper and lower layers to improve transmission efficiency. On the basis of the first element, the second element adds stubs to ensure sufficient phase shift. The far‐field cross polarisation is eliminated by special element arrangement. Then, a centre‐fed linear polarisation TMS is designed to generate orbital angular momentum beams with mode l = ? 1. The proposed TMS is designed, manufactured and measured to verify the proposed design. The measured results indicate that a maximum gain of 20.8 dBi and narrow divergence angle of ±5° are achieved at 18 GHz. Furthermore, mode purity is higher than 86.1% within the 17 to 19 GHz band. The proposed double‐layer TMS saved costs, reduced weight and without assembly error is a good candidate for OAM generator.     

打印层厚度对FDM薄板固有特性的影响

针对不同打印层厚度对熔融沉积成型(fused deposition modeling,简称FDM)薄板固有特性的影响规律及相应的机理进行了研究。首先,以悬臂边界条件下的FDM薄板为研究对象,创建了固有特性理论模型;其次,完成了薄板样件的制备,同时搭建了样件的动力学测试系统,实验研究了样件的固有特性参数;最后,对比分析理论与实验结果,以验证理论模型的正确性。研究结果表明,所建模型可以准确预测FDM薄板结构的固有特征参数;打印层越厚,样件的固有频率越高,但其模态振型不会随着打印层厚度的变化而变化。该研究为提高FDM产品动力学性能提供了理论基础和技术支持。     

Composite mixed matrix membranes incorporating microporous carbon molecular sieve as filler in polyethersulfone for CO2/CH4 separation

Membrane technology has been considered a key factor for sustainable growth in high-efficiency gas separation. Current mixed matrix membranes (MMMs) technology is rising, but these membranes in the dense structure are having difficulties in operating at high pressures and scale up for commercialization. The purpose of this research is to synthesize composite MMMs (CMMMs) consisting of polyethersulfone (PES), carbon molecular sieve (CMS 1–5 wt %), and Novatex 2471 nonwoven fabric (support layer). The membranes' physical, chemical, and thermal properties were evaluated by different analytical equipment. The morphology of both PES and PES-CMS composite membranes had a porous and asymmetric structure, in which CMS was uniformly distributed in the polymer matrix. The thermal properties showed that the membranes were stable up to 350 °C with a single glass transition temperature. The functional groups in the membrane were confirmed by spectral analysis. The gas performance results showed that carbon dioxide permeance increased with increased CMS concentration and methane permeance decreased due to the hindering effect of CMS under similar operating conditions. The highest selectivity achieved was 12.774 using CMMM of 5 wt % of CMS at 10 bar, which on average was 137.80%, improved selectivity compared to pure PES membrane. The support layer was able to withstand high operating pressures and showed the ability to scale up. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48476.